Research on compression ratio design based on compaction properties of solid backfill materials

Research on compression ratio design based on compaction properties of solid backfill materials

Received:2016-04-12 Online:2017-11-15 Published:2017-12-26

Abstract

LI Meng，ZHANG Jixiong，HUANG Yanli，ZHANG Qiang. Research on compression ratio design based on compaction properties of solid backfill materials[J]. Journal of Mining & Safety Engineering.

[1]	FENG Youliang，JU Wenjun，JIAO Jiankang，ZHANG Shiwei. Study on pump suction reverse circulation deslagging in drilling roadway floor anchoring boreholes through numerical experiments [J]. Journal of Mining & Safety Engineering, 2017, 34(1): 32-38.
[2]	LI Jianwei，LIU Changyou，ZHAO Jie. Multiple factor sensitivity analysis of strata pressure behaviour in shallow coal seam mining [J]. Journal of Mining & Safety Engineering, 2016, 33(5): 853-859.
[3]	AN Baifu，ZHANG Jixiong，LI Meng，HUANG Peng. Stability of pillars in backfilling mining working face to recover room mining standing pillars [J]. Journal of Mining & Safety Engineering, 2016, 33(2): 238-243.
[4]	ZHOU Nan, ZHANG Ji-xiong, MIAO Xie-xing, ZHANG Qiang. Advancing solid backfill mining on condition of two entries pre-excavation [J]. Journal of Mining & Safety Engineering, 2013, 30(5): 642-647.
[5]	ZHANG Ji-Xiong, JIANG Hai-Qiang, MIAO Xie-Xing, ZHOU Nan, ZAN Dong-Feng. Rational width of the support body of gob-side entries in fully mechanized backfill mining [J]. Journal of Mining & Safety Engineering, 2013, 30(2): 159-164.
[6]	ZHOU Yue-Jin, CHEN Yong, ZHANG Ji-Xiong. Control Principle and Technology of Final Compression Ratio of Backfilling Materials [J]. Journal of Mining & Safety Engineering, 2012, 29(3): 351-357.

Research on compression ratio design based on compaction properties of solid backfill materials

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 6

Recommended Articles

Metrics

Comments