[1] |
.
Energy evolution law and rock burst mechanism of
deep thick seams with large inclination
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 876-885.
|
[2] |
.
Determination of fully-mechanized top coal caving law and
parameters of thick lower seam in ultra-close multiple-seams
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 911-918.
|
[3] |
.
Study on bearing characteristics of filling paste and coal
in steeply inclined extra-thick coal seams with
large mining height and horizontal stratification
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 919-928.
|
[4] |
.
Influence of grouting on stability of supporting structure
in deep roadway intersection area
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 929-936.
|
[5] |
.
Large deformation characteristics and full cable support
technology of dynamic pressure roadways in
extremely soft coal seams
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 937-945.
|
[6] |
.
Impact failure characteristics and support methods of
roadway in largely-inclined broken coal seams
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 946-953.
|
[7] |
.
Experimental study on dynamic fracture characteristics
of different sizes of rock specimens with a crack
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 1045-1054.
|
[8] |
.
Mechanical properties and damage mechanism
of backfill with different water saturation
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 1063-1070.
|
[9] |
.
Strata behavior regularity and overlying strata broken structure
of super large mining-height working face with 8.8 m support
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 655-665.
|
[10] |
.
Numerical model construction and analysis of water inflow from
drainage of the inclined group holes in underground coalmine
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 687-694.
|
[11] |
.
Study on three-dimensional shape and permeability
of mining-induced fractured field in overburden rock
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 695-705.
|
[12] |
.
A comparative analysis of deep hole roof pre-blasting
and directional hydraulic fracture for rockburst control
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 706-719.
|
[13] |
.
Support technology of backfill pillar in parallel goaf roadway
with large cross-section in super long working face
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 739-748.
|
[14] |
.
Application of bolt-grouting reinforcement for broken surrounding
rock based on prestressed bolt and self-stress grouting
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 774-783.
|
[15] |
.
Law of columnar penetration of Bingham type slurry
in porous media
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 800-809.
|