[1] |
.
Seepage sliding analysis and stability study of sub-horizontal slope under under fissure water
[J]. Journal of Mining and Safety Engineering, 2022, 39(3): 607-614.
|
[2] |
.
Optimization of inner dumping ditch height for end-wall
coal mining in adjacent open-pit coalmines
[J]. Journal of Mining and Safety Engineering, 2021, 38(5): 997-1004.
|
[3] |
.
Experiment on size effect of coal and rock deformation
characteristics in coalmine underground reservoir
[J]. Journal of Mining and Safety Engineering, 2021, 38(4): 810-818.
|
[4] |
.
The influence of particle size and inclination angle
on seepage water pressure distribution
[J]. Journal of Mining and Safety Engineering, 2021, 38(3): 592-601.
|
[5] |
.
Mining rate effect of high-intensity working face based
on stress release rate and microseismic monitoring
[J]. Journal of Mining and Safety Engineering, 2021, 38(2): 295-303.
|
[6] |
.
Overlying strata fracture and instability process and
support loading prediction in deep working face
[J]. Journal of Mining and Safety Engineering, 2021, 38(2): 304-316.
|
[7] |
.
Experimental study on compression deformation of
soil-rock aggregate based on transparent soil technology
[J]. Journal of Mining and Safety Engineering, 2021, 38(1): 157-164.
|
[8] |
.
Roof fracture and instability law of overlying strata
in fully mechanized caving mining in ultra-close
thick coal seams under the room mining goaf
[J]. Journal of Mining and Safety Engineering, 2020, 37(6): 1180-1187.
|
[9] |
.
Determining method of the driving time for the gob-side entry considering the effect of gangue compression
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 928-935.
|
[10] |
.
The effect of stress transfer on the spatial distribution
of void ratios in crushed rock mass
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 723-730.
|