| [1] |
.
Research on control and prediction method of safety distance of oil-gas pipelines in aeolian sand mining subsidence area#br#
[J]. Journal of Mining and Safety Engineering, 2024, 41(4): 769-777.
|
| [2] |
.
Investigation into the durability and stress corrosion cracking of cable bolts in underground mine environments
[J]. Journal of Mining and Safety Engineering, 2024, 41(2): 267-276.
|
| [3] |
.
Research on technology and economic evaluation of coal mine green mining#br#
[J]. Journal of Mining and Safety Engineering, 2023, 40(5): 1092-1101.
|
| [4] |
.
Field study of longwall fully-mechanized caving mining by overburden isolated grouting under a surface railway tunnel#br#
[J]. Journal of Mining and Safety Engineering, 2023, 40(5): 1102-1110.
|
| [5] |
.
Experimental study on water reduction and modification of filling slurry by isolated grouting in overlying strata#br#
[J]. Journal of Mining and Safety Engineering, 2023, 40(5): 1122-1128.
|
| [6] |
.
Study on the spatiotemporal evolution law and mechanical mechanism of the three- field of overlying strata in- situ backfill mining
[J]. Journal of Mining and Safety Engineering, 2023, 40(4): 643-655.
|
| [7] |
.
Quantitative study on piled state of collapsed top coal
and drawing ratio in longwall with top coal caving
[J]. Journal of Mining and Safety Engineering, 2023, 40(4): 656-667.
|
| [8] |
.
Research and engineering application on physical and mechanical properties of coal mine high water filling materials
[J]. Journal of Mining and Safety Engineering, 2023, 40(4): 754-763.
|
| [9] |
.
Study on the distribution characteristics of deep hole blasting in the fan-shaped hole of Shilu Iron Mine
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 371-378.
|
| [10] |
.
Study on four level partition model of gangue fluidized filling in the caving zone
[J]. Journal of Mining and Safety Engineering, 2023, 40(1): 11-16.
|
| [11] |
.
Determining method of the driving time for the gob-side entry considering the effect of gangue compression
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 928-935.
|
