采矿与安全工程学报 ›› 2013, Vol. 30 ›› Issue (5): 723-727.

• 论文 • 上一篇    下一篇

原孔位多次应力解除地应力测试方法与实践

  

  1. 中国矿业大学矿业工程学院,煤炭资源与安全开采国家重点实验室,江苏 徐州 221116
  • 出版日期:2013-09-15 发布日期:2013-10-01
  • 作者简介:郑西贵(1977-),男,山西省侯马市人,博士,讲师,从事采矿工程方面的研究。 E-mail:ckzxg@126.com Tel:13912041768
  • 基金资助:

    国家自然科学基金青年基金项目(51104152);教育部长江学者和创新团队发展计划项目(IRT1084)

The in-situ stress measurement and practice of repeatedly stress relief on the original borehole

  • Online:2013-09-15 Published:2013-10-01

摘要: 针对影响深部煤矿巷道围岩稳定的地应力因素,基于深埋巷道围岩体应力分布的力学特征和地应力钻孔解除法原理,探讨了在同一钻孔内间隔一定距离进行反复多次解除的地应力测试方法,建立了判别原始应力的科学依据,根据基准孔和校验孔的测量结果,可以推算出其他测点原岩应力区与巷道半径之间的关系。工程实践表明:在千米埋深的大屯矿区孔庄煤矿井底车场区域,基准孔在3.7R 处进入了原岩应力区,实测垂直原岩应力值为23.3 MPa,并在校验孔和推广孔得到了验证。

关键词: 地应力, 应力解除, 原孔位, 测试方法, 判据

Abstract: With the stress-factors affecting the stability of tunnel-surrounding rock, based on the stress distribution of deep tunnel-surrounding rock and the principle of stress relief method, the in-situ stress measurement of repeatedly stress relief on the original boreholes was approached, and the scientific basis of discriminating the original boreholes was established. According to the measurement of basic borehole and checking borehole, the relations between the original rock stress in other measuring area and radius of the tunnel could be deduced. The project practice showed that, in Kongzhuang colliery, Datun coal mining area with buried depth more than 1 000 m, the basic borehole enter the original rock stress area at the distance about 3.7R, the original vertical stress result is 23.3 MPa,which was proved in the checking borehole and extension borehole.

Key words: in-situ stress, stress relief, the original boreholes, measurement method, criterion