采矿与安全工程学报 ›› 2016, Vol. 33 ›› Issue (4): 721-727.

• 论文 • 上一篇    下一篇

拉斗铲一次作业循环效率提升研究

  

  1. 1.中国矿业大学(北京)资源与安全工程学院,北京  1000832.国家安全生产监督管理总局通信信息中心,北京  100713
  • 收稿日期:2015-07-15 出版日期:2016-07-15 发布日期:2016-07-25
  • 作者简介:孙健东(1988—),男,江苏省徐州市人,博士研究生,从事能源开发新技术方面的研究。
  • 基金资助:

    煤炭资源与安全开采国家重点实验室开放课题项目(SKLCRSM14KFB12)

Study on efficiency promotion of dragline with single-operation cycle

  • Received:2015-07-15 Online:2016-07-15 Published:2016-07-25

摘要: 为提高拉斗铲作业效率,针对黑岱沟露天矿8750型拉斗铲的作业循环耗时进行了统计研究。结果表明:挖掘方式、岩土台阶几何形状是影响挖掘效率的主要因素,提出组合式挖掘、改变岩土局部几何形状提高设备挖掘环节效率;设备转动耗时是影响一次作业循环效率的主要因素,提出满载旋转、空载返回环节中,应保持设备加速、减速过程中转动角度的比值分别为3/2,4/5;铲斗提升耗时是制约挖掘煤沟作业效率的关键因素,根据“提升-旋转”制约关系制定了拉斗铲挖掘-排弃位置参考表。

关键词: 拉斗铲, 无运输倒堆工艺, 循环耗时, 作业效率

Abstract: In order to improve the efficiency of dragline operation,statistical study has been made on time consuming of dragline single-operation cycle in Heidaigou surface mine. The results have shown that mining methods and geometry of soil bench are the main influence factors of digging efficiency and put forward combined-type digging and changed partial geometry shape of soil in order to improve digging efficiency. Time consuming of equipment rotation is the main factor that influence the efficiency of single operation cycle, so rotation angle ratio of acceleration and deceleration process should be 3/2 in rotating and 4/5 in returning step respectively. Time consuming of bucket ascension is the key factor which restricts the efficiency of coal trench excavation. Reference table of dragline operation has been made according to the restrictive relation between bucket ascension and equipment rotation.

Key words: dragline, overcast stripping, circulating time, operational efficiency