| [1] |
.
Coal ribs stability analysis and control countermeasures of bare roof roadway under hard roof condition
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 861-870.
|
| [2] |
.
Stability of isolated coal pillar and overburden instability in shallow-buried interval gob
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 936-942.
|
| [3] |
.
Acoustic emission characteristics of coal with strong impact proneness under different loading modes
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 977-982.
|
| [4] |
.
The effect of spatial distribution mode of hydraulic slotting on pressure relief and permeability enhancement of the coal seam
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 983-990.
|
| [5] |
.
Rule of multi-key strata movement-fracture evolution-dynamics of gas emission in deep long distance lower protective layer mining
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 991-1000.
|
| [6] |
.
Formation mechanism and evolution model of sliding surface on the bedding rock mining slope
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 1019-1026.
|
| [7] |
.
The mechanical behavior of surrounding rock mass in double fault area
[J]. Journal of Mining and Safety Engineering, 2020, 37(5): 1061-1066.
|
| [8] |
.
Experimental study on the structure of reinforced concrete reticulated shell support in soft rock roadway
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 655-664.
|
| [9] |
.
Study of failure characteristic and bolt’s loading law of anchorage body with single face under uniaxial compression
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 665-673.
|
| [10] |
.
The deformation characteristics of surrounding rock of
crossing roadway in multiple seams under repeated mining
and its repair and reinforcement technology
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 681-688.
|
| [11] |
.
Discrete element analysis of the key influence factors and
control technology of coal roadway sidewall instability
for excavation based on RSM-BBD design
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 707-714.
|
| [12] |
.
Heterogeneous characteristics of coal based on CT scanning
and numerical analysis of its reconstruction model
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 828-835.
|
| [13] |
.
Quantitative characterization of working condition characteristic
between homologous and mixed source extraction
[J]. Journal of Mining and Safety Engineering, 2020, 37(4): 845-851.
|
