[1] |
.
The “relative movement” deformation mechanism and control technique of gob-side entry retaining in top-coal caving mining
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 224-231.
|
[2] |
.
Study on the bearing characteristics and reasonable width of the backfilling body for gob-side entry in fully-mechanized top-coal caving face under the roof cutting condition
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 232-242.
|
[3] |
.
Study on mechanical properties and section design method of confined concrete arch
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 243-250.
|
[4] |
.
Roof-pillar-support collaborative load and control analysis in large-mining-height passing gateways
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 251-262.
|
[5] |
.
Study on the influence of the static load of the surface covering soil on the stability of the shallowburied main adit
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 263-273.
|
[6] |
.
Cooperative prediction method of coal and gas outburst risk grade based on feature selection and machine learning algorithm
[J]. Journal of Mining and Safety Engineering, 2023, 40(2): 361-370.
|
[7] |
.
Mechanism and safety mining technology of rock burst induced by double layer superposition coal pillar in inclined fully mechanized caving face
[J]. Journal of Mining and Safety Engineering, 2023, 40(1): 36-47.
|
[8] |
.
Deformation and failure law and control technology of right-angle trapezoidal mining roadway in deep mine
[J]. Journal of Mining and Safety Engineering, 2023, 40(1): 82-90.
|
[9] |
.
Key parameters and engineering application of roof cutting and pressure relief driving in cutting lower key stratum
[J]. Journal of Mining and Safety Engineering, 2023, 40(1): 91-100.
|
[10] |
.
Research on high strength boltgrouting control technology for gob side entry retaining with deep roof cutting
[J]. Journal of Mining and Safety Engineering, 2023, 40(1): 101-111.
|
[11] |
.
Short-and long- walls backfilling pillarless coal mining method
[J]. Journal of Mining and Safety Engineering, 2022, 39(6): 1116-1124.
|
[12] |
.
Height prediction and threedimensional development characteristics of waterconducting fracture zone in weakly cemented overburden
[J]. Journal of Mining and Safety Engineering, 2022, 39(6): 1154-1160.
|
[13] |
.
Construction method, principle and technical realization of equivalent briquette based on intelligent inversion
[J]. Journal of Mining and Safety Engineering, 2022, 39(6): 1210-1217.
|
[14] |
.
Study on gas control technology by sublevel filling gob-side entry retaining
[J]. Journal of Mining and Safety Engineering, 2022, 39(6): 1246-1255.
|
[15] |
.
Movement law of overburden in steep inclined ultra thick seam and calculation of support working resistance
[J]. Journal of Mining and Safety Engineering, 2022, 39(3): 499-506.
|