| [1] |
.
Shear strength and ultrasonic P-wave velocity response characteristics of gangue powder-based cemented backfill materials
[J]. Journal of Mining and Safety Engineering, 2026, 43(4): 938-946.
|
| [2] |
.
Reconstruction and prediction of open-pit mine slope deformation based on spatiotemporal correlations among monitoring points
[J]. Journal of Mining and Safety Engineering, 2026, 43(2): 493-508.
|
| [3] |
.
Constraint mechanism on leaching and migration of heavy metal ions from gangue-based cement solidified filling bodies in the goaf
[J]. Journal of Mining and Safety Engineering, 2026, 43(1): 35-47.
|
| [4] |
.
Morphological characterization and frictional resistance analysis of ultra-long solid-backfill scraper conveyors
[J]. Journal of Mining and Safety Engineering, 2026, 43(1): 58-69.
|
| [5] |
.
Experimental investigation into stress corrosion cracking using full-scale cable bolt specimens
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1302-1312.
|
| [6] |
.
Study on the dynamic response characteristics of longwall panel floor under impact load caused by roof collapse
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1360-1371.
|
| [7] |
.
Compaction and fragmentation characteristics of fractured coal-rock mass under loading-unloading conditions with varying influencing factors
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1395-1408.
|
| [8] |
.
Study on energy and damage evolutions of cemented backfill under triaxial compression influenced by temperature
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1409-1422.
|
| [9] |
.
Study on fluidity and mechanical properties of water protection mining multi-source coal-based solid waste filling materials
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1443-1454.
|
| [10] |
.
Research on the shear strength and slope reinforcement effect of electrochemically modified mudstone
[J]. Journal of Mining and Safety Engineering, 2025, 42(6): 1467-1478.
|
| [11] |
.
Permeability response mechanism of the mining floor and in-situ protection of confined aquifers
[J]. Journal of Mining and Safety Engineering, 2025, 42(5): 1116-1128.
|
| [12] |
.
Research on the preparation and mechanical properties of alkali-activated lithium slag-based composite paste backfill material using RSM-BBD
[J]. Journal of Mining and Safety Engineering, 2025, 42(5): 1141-1152.
|
| [13] |
.
Analysis of heat extraction capacity and pre-cooling effect during water injection ahead of coal seam extraction in deep mines
[J]. Journal of Mining and Safety Engineering, 2025, 42(5): 1188-1203.
|
| [14] |
.
Research status and prospects on recovery methods for the resources under end slopes in open-pit coal mines
[J]. Journal of Mining and Safety Engineering, 2025, 42(3): 497-509.
|
| [15] |
.
Study on prevention and control of roof dynamic disasters by ground regional fracturing in isolated working face of extra-thick coal seam mining
[J]. Journal of Mining and Safety Engineering, 2025, 42(3): 532-543.
|
