| [1] |
.
[J]. Journal of Mining & Safety Engineering, 2018, 35(3): 449-.
|
| [2] |
.
Reasonable segment pillar width and its control technology for fully mechanized top-coal caving face with high stress
[J]. Journal of Mining & Safety Engineering, 2018, 35(1): 19-26.
|
| [3] |
.
Study on long-term and high pressure consolidation process
of remodeling deep clay
[J]. Journal of Mining & Safety Engineering, 2017, 34(6): 1169-1173.
|
| [4] |
.
Mechanical mechanism of dynamic fracture evolution of coal floor unloading in deep mining
[J]. Journal of Mining & Safety Engineering, 2017, 34(5): 876-883.
|
| [5] |
CHEN Denghong，HUA Xinzhu.
The deformation law of the surrounding rock in deep mining
roadways under the influence of multi-factors
and the control countermeasures
[J]. Journal of Mining & Safety Engineering, 2017, 34(4): 760-768.
|
| [6] |
.
Patterns of the water-inrush hazard in the floor strata in deep mines and its catastrophic characteristics
[J]. Journal of Mining & Safety Engineering, 2017, 34(3): 459-463.
|
| [7] |
.
Analysis of instability characteristics of surrounding rocks in mudstone roof gateway subjected to high stress and its control
[J]. Journal of Mining & Safety Engineering, 2017, 34(3): 519-526.
|
| [8] |
WANG Xiaoqing，KAN Jiaguang，JIAO Jiankang.
Mechanism of floor heave in the roadway with high stress and soft rock and its control practice
[J]. Journal of Mining & Safety Engineering, 2017, 34(2): 214-220.
|
| [9] |
WANG Jiong，FENG Zhenghao，MENG Zhigang，ZHANG Yilong.
In-situ stress measurement and its numerical analysis in Hongyang mining area
[J]. Journal of Mining & Safety Engineering, 2017, 34(1): 134-140.
|
| [10] |
WANG Feng，XU Jialin，XIE Jianlin，GUO Jiekai.
Pressure-relief mechanism of lower seam extraction after upper seam extraction
[J]. Journal of Mining & Safety Engineering, 2016, 33(3): 398-402.
|
| [11] |
HAO Yuxi，WANG Jiong，WANG Hao，MENG Zhigang，GUO Zhibiao.
Coupled bolt-mesh-anchor supporting technology for deep fault fracture zones throughout layers soft rock roadway
[J]. Journal of Mining & Safety Engineering, 2016, 33(2): 231-237.
|
| [12] |
ZHOU Gang, WANG Pengju, ZOU Changlei, WANG Hao, WANG Chao.
Asymmetric supporting research of gob-side entry driving in complex tectonic stress mining area
[J]. Journal of Mining & Safety Engineering, 2014, 31(6): 901-906.
|
| [13] |
JING Shengguo, WANG Qizhou, CHEN Jie.
Study on strengthening control mechanism with support and cable for roadway in“three-soft”coal seam during deep mining
[J]. Journal of Mining & Safety Engineering, 2014, 31(6): 938-944.
|
| [14] |
NIE Taoyi, PU Hai.
Numerical simulation research of splitting failure of roadway under high stress
[J]. Journal of Mining & Safety Engineering, 2014, 31(6): 963-968.
|
| [15] |
HUANG Wen-zhong, WANG Wei-jun, YU Wei-jian.
Analysis on secondary support parameter of deep high-stress & broken-expand surrounding rock
[J]. Journal of Mining & Safety Engineering, 2013, 30(5): 665-672.
|
