| [1] |
.
Research on parameters optimization of stress relief blasting in coal roadway using orthogonal experiment
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 931-939.
|
| [2] |
.
[J]. Journal of Mining & Safety Engineering, 2018, 35(4): 869-876.
|
| [3] |
.
[J]. Journal of Mining & Safety Engineering, 2018, 35(3): 449-.
|
| [4] |
.
[J]. Journal of Mining & Safety Engineering, 2018, 35(3): 629-.
|
| [5] |
.
Particle size distribution and energy dissipation of
saturated crushed sandstone under compaction
[J]. Journal of Mining & Safety Engineering, 2018, 35(1): 197-204.
|
| [6] |
.
LVQ-CPSO-BP-based prediction technique of coal gas permeability rate
[J]. Journal of Mining & Safety Engineering, 2017, 34(2): 398-404.
|
| [7] |
ZHANG Minglei，ZHANG Yidong，JI Ming，CHENG Liang，HUANG Fumang.
Roadway support parameter optimization based on fuzzy extension synthetic evaluation
[J]. Journal of Mining & Safety Engineering, 2016, 33(6): 972-978.
|
| [8] |
TANG Li-Zhong, GAO Long-Hua, WANG Chun, JIANG Feng.
Numerical analysis of stability of roadway surrounding rock with weak interlayer under dynamic disturbance
[J]. Journal of Mining & Safety Engineering, 2016, 33(1): 63-69.
|
| [9] |
YAO Ya-Feng, CHENG Hua, RONG Chuan-Xin, LI Ming-Jing, CAI Hai-Bing, SONG Jian.
Analysis and prediction of vertical shaft freezing pressure in deep alluvium based on RBF fuzzy neural network model
[J]. Journal of Mining & Safety Engineering, 2016, 33(1): 70-76.
|
| [10] |
XU Shuai，AN Long，LI Yuanhui，WU Jin.
SOM-based optimization of stope structural parameters of deep & large-sized orebody
[J]. Journal of Mining & Safety Engineering, 2015, 32(6): 883-888.
|
| [11] |
ZHAO Yiming，ZHANG Nong，ZHENG Xigui，LI Baoyu.
Structural optimization of overlying strata for gob-side entry retaining in 1000 m deep mine with direct thick and hard roof
[J]. Journal of Mining & Safety Engineering, 2015, 32(5): 714-720.
|
| [12] |
WANG Weiming，LYU Xianzhou，QIN Wenlu.
Study on optimization of rapid combined excavation cutting sequence in half-coal rock roadway
[J]. Journal of Mining & Safety Engineering, 2015, 32(5): 771-777.
|
| [13] |
LIN Jian, REN Shuo.
Numerical simulation optimization research of bolt profile configuration with resin full-length anchoring
[J]. Journal of Mining & Safety Engineering, 2015, 32(2): 273-278.
|
| [14] |
CAI Hai-Bing, CHENG Hua, RONG Chuan-Xin, SONG Hai-Qing, LI Ming-Jing.
Rock stability analysis and supporting structure optimization of deep shaft ingate under complex conditions
[J]. Journal of Mining & Safety Engineering, 2015, 32(2): 298-304.
|
| [15] |
TAN Yuye, SONG Weidong, LI Tieyi, XIA Hong.
Multi-objective decision for mining method optimization based on weights assigned by fuzzy judgment matrix
[J]. Journal of Mining & Safety Engineering, 2014, 31(4): 551-557.
|
