[1] |
.
Study on the mechanism and control technology of large deformation of roadway surrounding rock in the fault fracture zone
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 885-892.
|
[2] |
.
Mechanical analysis of roof separation within and outside anchorage zone above backfill area of gob-side entry retaining and its engineering application
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 893-901.
|
[3] |
.
Deformation and failure characteristics of roadway surrounding rock in layered rock mass of fold region and its control strategies
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 902-909.
|
[4] |
.
Study on roof-fall mechanism,repairing and control of surrounding rock of inclined shaft in shallow burnt rock area
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 910-917.
|
[5] |
.
An energy arithmetic of anchoring behavior of full-length bonding fiber reinforced plastic bolts under elastic state
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 918-925.
|
[6] |
.
Improvement and analysis of calculation model for empty hole effect in parallel cut
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 926-930.
|
[7] |
.
Research on parameters optimization of stress relief blasting in coal roadway using orthogonal experiment
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 931-939.
|
[8] |
.
Research on roof structure and support resistance during first periodic weighting in shallow group coal seams
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 940-945.
|
[9] |
.
Development of hydraulic support pressure gauge based on FBG and its performance test
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 945-952.
|
[10] |
.
Structural evolution of ladder roof and its stability analyses for a fully-mechanized working face with a large mining height in steeply inclined coal seam
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 953-959.
|
[11] |
.
Treatment and utilization of dirt band between contiguous coal seams
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 960-969.
|
[12] |
.
Three-dimensional geological modeling and surface damage in gully area due to shallow coal seam mining
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 969-977.
|
[13] |
.
Study on law of surrounding rock movement induced by mining large and thick ore body
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 978-983.
|
[14] |
.
Research on salawusu formation aquifer protected by water preserving mining in Yu-Shen-Fu mining area
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 984-990.
|
[15] |
.
Study on ultimate filling pace of backfill mining with slurry swelling compound material
[J]. Journal of Mining & Safety Engineering, 2018, 35(5): 991-996.
|